1.1.6. Linux, Rocky

These setup instructions are for Rocky Linux version 8.

Things to note before starting

0. Each step involves either copy+pasting a command, or clicking on a download link.

1. Admin privileges are needed for some steps: check if you can run sudo ls, entering the correct password. If you can’t, perhaps ask an administrator to do that step, and you can do the others that don’t require it.

2. Note your terminal shell type (bash, zsh, tcsh, csh, etc.), by copy+pasting:

   echo $0
   

3. Do the system check in the “Evaluate” stage. Try any recommendations in its “Please Fix” section.

4. If you run into any problems, please just ask a clear question on the AFNI Message Board.

1. To copy and paste in a Linux terminal, one can use Ctrl+Shift+c and Ctrl+Shift+v, respectively. (In WSL terminals, one might first enable this functionality: rightclick on the panel’s taskbar, select “Properties” and put a checkmark by this option.)

2. To open a text file, use any text editor you like, and/or you can type gedit FILENAME, such as either:

   gedit ~/.bashrc
   
   gedit ~/.bashrc &
   

Quick setup

This is the quick form of AFNI setup for Rocky 8. It includes downloading the Bootcamp data and running the system check (don’t forget to do that!).

1. Download the command scripts.

   Copy+paste:

   cd
   curl -O https://raw.githubusercontent.com/afni/afni/master/src/other_builds/OS_notes.linux_rocky_8_a_admin.txt
   curl -O https://raw.githubusercontent.com/afni/afni/master/src/other_builds/OS_notes.linux_rocky_8_b_user.tcsh
   curl -O https://raw.githubusercontent.com/afni/afni/master/src/other_builds/OS_notes.linux_rocky_8_c_nice.tcsh
   

   Feel free to read any of these, for educational purposes.

   
   

2. Run command scripts.

   Check your shell (echo $0), and use the appropriate set of commands below. Running the commands this way creates a text file, o.rocky*.txt, which can be sent to an AFNI guru for troubleshooting, if necessary.

   For bash users:

   1. Copy+paste the following (requires sudo with password):

      sudo bash OS_notes.linux_rocky_8_a_admin.txt 2>&1 | tee o.rocky_8_a.txt
      

   2. Copy+paste the following (no sudo):

      tcsh OS_notes.linux_rocky_8_b_user.tcsh 2>&1 | tee o.rocky_8_b.txt
      

   3. (optional, but useful) To niceify your terminal, copy+paste the following (no sudo):

      tcsh OS_notes.linux_rocky_8_c_nice.tcsh 2>&1 | tee o.rocky_8_c.txt
      

   For tcsh or csh users:

   1. Copy+paste the following (requires sudo with password):

      sudo bash OS_notes.linux_rocky_8_a_admin.txt |& tee o.rocky_8_a.txt
      

   2. Copy+paste the following (no sudo):

      tcsh OS_notes.linux_rocky_8_b_user.tcsh |& tee o.rocky_8_b.txt
      

   3. (optional, but useful) To niceify your terminal, copy+paste the following (no sudo):

      tcsh OS_notes.linux_rocky_8_c_nice.tcsh |& tee o.rocky_8_c.txt
      

3. Evaluate/check the setup

   
   

   1. Open a new terminal, and run the AFNI system check:

      afni_system_check.py -check_all
      

      Read the “Please Fix” section at the bottom, to see if setup is complete.

      If there are suggested fixes, please do those and re-run the system check.

      Ask any questions on the Message Board

      
      

   2. Open up the AFNI and SUMA GUIs, juuuust to make sure all is well:

      afni
      suma
      

      Report any crashes! Otherwise, you are all set.

      
      

(slow setup) Install prerequisite packages

1. Copy+paste:

   sudo dnf install -y tcsh gcc motif-devel gsl-devel        \
                       libXpm-devel mesa-libGLw-devel        \
                       mesa-libGLU-devel libXi-devel         \
                       glib2-devel                           \
                       python39 python3-matplotlib           \
                       python3-flask python3-flask-cors      \
                       python3-numpy
   

2. Copy+paste:

   sudo alternatives --set python /usr/bin/python3
   

3. Copy+paste:

   sudo dnf config-manager --set-enabled powertools
   

4. Copy+paste:

   sudo dnf install -y epel-release R-devel
   

   Purpose: Installs a lot of packages that AFNI depends on (so we don’t have to reinvent the wheel!). This may take a little while to complete running. Note: python3 does not come with ‘python’, we have to ask for that

(slow setup) Install AFNI binaries

1. Choose one of the following approaches:

   • (default) To install the binaries from online, copy+paste:

     cd
     curl -O https://afni.nimh.nih.gov/pub/dist/bin/misc/@update.afni.binaries
     tcsh @update.afni.binaries -package linux_rocky_8 -do_extras
     

   • (alternative) To install already-downloaded binaries, use -local_package .. (replacing PATH_TO_FILE with the actual path; also, if @update.afni.binaries has also been downloaded, you can skip the curl .. command), copy+paste:

     cd
     curl -O https://afni.nimh.nih.gov/pub/dist/bin/misc/@update.afni.binaries
     tcsh @update.afni.binaries -local_package PATH_TO_FILE/linux_rocky_8.tgz -do_extras
     

   Purpose: Download and unpack the current binaries in your $HOME directory; set the AFNI binary directory name to $HOME/abin/; and add that location to the $PATH in both ~/.cshrc and ~/.bashrc.

(slow setup) Install R

1. Check your shell type (echo $0). For …

   
   

   • ... a tcsh terminal, copy+paste:

     setenv R_LIBS $HOME/R
     mkdir  $R_LIBS
     echo  'export R_LIBS=$HOME/R' >> ~/.bashrc
     echo  'setenv R_LIBS ~/R'     >> ~/.cshrc
     

   • ... a bash terminal, copy+paste:

     export R_LIBS=$HOME/R
     mkdir  $R_LIBS
     echo  'export R_LIBS=$HOME/R' >> ~/.bashrc
     echo  'setenv R_LIBS ~/R'     >> ~/.cshrc
     

   Purpose: Set the environment variable $R_LIBS to specify where to install+find the R packages.

   
   

2. Copy+paste:

   rPkgsInstall -pkgs ALL
   

   Purpose: Get specific R packages needed for AFNI programs. This step might take a while (of order an hour) to complete, because R will compile the packages. Sigh.

   
   

(slow setup) Prepare for Bootcamp

1. Copy+paste:

   curl -O https://afni.nimh.nih.gov/pub/dist/edu/data/CD.tgz
   tar xvzf CD.tgz
   cd CD
   tcsh s2.cp.files . ~
   cd ..
   

   Purpose: Download the Bootcamp class data; untar+unzip it (= open it up); move into the newly opened directory; execute a script to copy the files to $HOME/..

   If no errors occur in the above, and your afni_system_check.py says things are OK, you can delete/remove the tarred/zipped package, using “rm CD.tgz”. If you are really confident, you can also deleted the CD/ directory in the present location.

   
   
2. !Pro tip!: Bring a computer mouse to use at the Bootcamp. It is muuuuch easier to follow the demos that way.

   
   

3. Read+practice with the handy Unix documentation/tutorial.

   Purpose: give you a quick lesson/refresher on using basic Linux shell commands (e.g., ls, cd, less, etc.). It will greatly enhance your bootcamp experience– we promise!

(slow setup) Evaluate setup/system (important!)

1. Open a new terminal, and then copy+paste:

   afni_system_check.py -check_all
   

2. Read the “Please Fix” section at the end. If there are no suggestions, then rejoice! Otherwise, try the suggestion(s) there.

   
   

3. Open up the AFNI and SUMA GUIs, juuuust to make sure all is well:

   afni
   suma
   

Report any crashes or problems!

If stuck, then …

• try searching online with the error message, and/or ask on the Message Board

• send the system check to an AFNI guru for advice—copy+paste:

  afni_system_check.py -check_all > out.ASC.txt
  

  ... and email the file “out.ASC.txt”.

(slow setup) Niceify terminal (optional, but goood)

1. To improve your life when using the terminal, copy+paste:

   echo 'set filec'    >> ~/.cshrc
   echo 'set autolist' >> ~/.cshrc
   echo 'set nobeep'   >> ~/.cshrc
   
   echo 'alias ls ls --color=auto' >> ~/.cshrc
   echo 'alias ll ls --color -l'   >> ~/.cshrc
   echo 'alias ltr ls --color -ltr'   >> ~/.cshrc
   echo 'alias ls="ls --color"'    >> ~/.bashrc
   echo 'alias ll="ls --color -l"' >> ~/.bashrc
   echo 'alias ltr="ls --color -ltr"' >> ~/.bashrc
   

   Purpose: The first commands set up tab autocompletion for tcsh (which should already be enabled for bash, by default). The second set of commands make aliases so that different types of files (“normal” files, zipped files, executables, et al.) and directories are shown using different colors and boldness. It makes it much easier to navigate on a terminal, IMHO.

1. Also, consider running gnome-tweak-tool and changing Windows -> Focus Mode from ‘click’ to ‘mouse’.

2. Also, consider extending time for screen saver: System Settings -> Brightness & Lock, and set inactivity duration.

(slow setup) Install extras (optional, but recommended for Bootcamp prep)

1. If you plan to use the FATCAT_matplot functionality in AFNI, then copy+paste the following:

   @afni_R_package_install -shiny -circos
   

   Purpose: This script will install the R packages for FATCAT_matplot and other ‘shiny’ tools (via bioconductor). And it might take a little while to complete…

(slow setup) Keep up-to-date (remember!)

1. To update your AFNI sometime, copy+paste:

   @update.afni.binaries -d
   

   That’s it!!

   Purpose: This will automatically download the correct, latest AFNI version to your computer, replacing your old binaries. It will also update the apearch help information. Update often!

2. To check your AFNI version, copy+paste:

   afni -ver
   

   Purpose: Report this useful info whenever asking a question on the Message Board!

Note

The record of all changes (new options, new programs, bug fixes, et al.) in AFNI programs is maintained for all to see in the online AFNI History.

A note on setting up Python/using Conda (opt)

For this OS, you should not need to do anything further to set up your Python.

AFNI has very minimal Python requirements—at present, matplotlib and numpy. For example, for the recommended automatic QC output from afni_proc.py, matplotlib is necessary.

You can use any method to install+manage Python and its dependencies. In fact, your OS might have all the Python+modules needed to run AFNI already. Check this by running:

afni_system_check.py -check_all

... and seeing there are no notes in the “Please fix” section at the end—if there are none about Python, then you are all set!

But if you do still need to setup Python with appropriate modules, or you want to manage different environments with different package needs (Python or otherwise), then we note that we have found Miniconda to be convenient. It is cross-platform (with occasional OS-specific quirks). If you are interested in either using it or reading more about it, you can check out this tutorial, which has both verbose and quick instructions.

But Miniconda is not required.